RCA RLC2626 Operating Instructions Manual page 14

External connection
2. How to assemble the stand?
Before attaching/detaching the stand, make sure to turn off the TV.
Before performing work spread cushioning over the base area to lay the LCD TV on.
This will prevent it from being damaged.
A. M4X8 screw
B. Transition Board
C. M4X8 screw
D. Stand
Figure1
Assembling instruction:
1.Unfasten screws A from the LC D TV. (Figure1)
2.Detach theTransition Board B from the LCD TV.(Figure1)
3.Fix the stand and the Transition B oard together with screws C. (Figure2)
The fixing direction follows the label of the stand and the transition board.
4.Put the transition board and the stand back into the LCD TV. (Figure 3)
5. Fasten screws into the holes to fix the stand and TV cabinet together. (Figure3)
Note: To disconnect the stand from the TV, perform the above steps in reverse order.
Figure2
Figure3
13