Basic Operation - RCA RLC2626 Operating Instructions Manual

Basic operation (to be continued)
14
Turning the TV On and Off
1. Insert the power cord plug into a AC outlet, the TV
will enter standby mode.Press POWER button
on the remote control to turn it on . The indicator
will switch from red to green.
2. If you want to stop watching TV or go out for a
while, you can press POWER button on the re-
mote control. If you want to watch TV again, you
can press this button again.
3. Unplug the power cord when the TV will not be
used for a long period time.
Auto power-off
The TV will enter standby mode in 15 seconds
in PC mode,and in other modes it will enter
standby mode in 5 minutes when no signal
sleep is on.
Memorizing the Channels
Your TV can memorize all of the available
channels. After the available channels are
memorized, use PROGr/sbutton to browse
channels.
Language select
Before using TV, you can set the language:
1) Press MENU button on the remote control, then
Arrow button to select "Setting" menu
t u
press /
as following:
PICTURE
LANGUAGE
SCREEN SAVER
OSD POSITION
DURATION
ADJUST
AUDIO SETTING FUNCTION CHANNEL
ENGLISH
OFF
MID
ALWAYS
SELECT MENU EXIT