Casio V-R7000 Service Manual page 22

HDMI
NOTE: Since the connector is located on the rear side, carefully connect or disconnect the cable.
Connect a monitor with the HDMI input
connector to the HDMI Port with the HDMI cable.
1
Tap "HDMI".
Check that a video is displayed on the monitor
together with a sound.
2
After checking, tap "
judgment screen, and then tap the obtained test
result.
SD 1 (Back)
NOTE: Since the slot is located on the rear side, carefully insert or remove the SD card.
Insert the SD card to the SD Slot 1.
Tap "SD 1 (Back)".
Automatic judgment is done and the test result
1
appears.
If the test result is "NG", check if the SD card is mounted.
If not mounted, mount it and try again.
2
" to show the
– 18 –
V-R7000/V-R7100
HDMI Port
SD Slot 1