Casio V-R7000 Service Manual page 20

mic/speaker
Tap "mic speaker".
Record a voice and then play it back. Check that
the recorded voice is properly played back.
: Starts recording.
: Stops recording.
: Plays back.
After checking the playback voice, tap "Discard"
1
to terminate the test.
As the judgment screen is displayed, tap the
obtained test result.
NOTE: Perform the test without connecting a
Head set and the HDMI cable to the
terminal.
USB 0 (Left Side)
NOTE: Note that the USB numbers used in the test program and the device differ with each other.
Name in the test program
USB 0 (Left Side)
USB 1 (Back)
1
In this manual, the notation of the USB name is base on the name used in the device.
Insert the USB Flash Drive to the USB Port 1.
Tap "USB 0 (Left Side)".
Automatic judgment is done and the test result
2
appears.
NOTE: Once the test result is found "NG", the test result will become always "NG" even if you tap
"USB 0 (Left Side)" again or perform the test again after replacing the USB Flash Drive.
In this case, unmount the USB Flash Drive once and then mount it again.
3
Name in the device
USB Storage 1
USB Storage 2
– 16 –
V-R7000/V-R7100
USB Port 1