Planet XT-705A User Manual page 22

Connecting the UTP Cable
The 10G/5G/2.5G/1G/100BASE-T port uses RJ45 socket --
similar to phone jack -- for connection of unshielded twisted-
pair cable (UTP). The 802.3u/802.3ab/802.3bz/802.3ae Ethernet
standard requires Category 5 UTP for 100Mbps 100BASE-TX.
10G/5G/2.5G/1G/100BASE-T uses Cat5e/6/6A/7 UTP (see table
below). Maximum distance is 100 meters (328 feet).
Standard
10GBASE-T
5GBASE-T
2.5GBASE-T
1000BASET
100BASE-TX
Be sure the connected network devices support
MDI/MDI-X. If it does not support, then use the
crossover Category 5e6/6A/7 cable.
Note
22
Transfer Speed
10000Mbit/s
5000Mbit/s
2500Mbit/s
1000Mbit/s
100Mbit/s
Cable Requirement (100M)
Cat 6A/7
Cat 6/6A/7
Cat 5e/6/6A/7
Cat 5e/6/6A/7
Cat 5/5e/6/6A/7