Cd Mecha Tray - Samsung MAX-460V Service Manual

Disassembly and Reassembly

3-7 CD Mecha Tray

1. Remove 1 screw ! and then remove the Roulette @ .
2. Remove 6 Cushions + .
3. Remove 2 Washers # .
4. Remove the Gear-Roulette(2) $ and then remove the Gear-Roulette (1) %.
5. Remove 3 screws ^ and then remove three Cushion-Bracket & .
6. Remove 3 Cushion-Motors * .
7. Remove 2 screws ( and then remove the Motor-DC 1 .
8. Remove the Bracket-Motor ) .
9. Remove the Shaft-Motors(1) 1 .
10. Remove the Gear-Worm 2 from the Motor-DC.
11. Remove the PCB-SUB Motor(R) 3 with using the soldering iron.
12. Remove the A/S, C/wire 4 with a soldering iron.
13. Remove 1 screw 5 and then remove the connector-header 6, Sensor-Roulette 7 and the A/S, C/wire(FL)
8 with using a soldering iron.
14. Remove the PCB-SUB sensor(R) 9.
20
3-6
6
14 7
13
11
12
4 22 10
21
16
1
3
23
5
9
8
18
17
19
15
Figure 3-6
2
22
Samsung Electronics