Cd-Pcb - Samsung MAX-460V Service Manual

3-5 CD Mecha Main Continued
1. Turn the Bracket-chuck ! counter clockwise to remove.
2. Remove the Table-Chuck union @.
3. Remove the Magnet-Chuck #.
4. Remove the screw $ and then lift the Gear-Tray(2) %.
5. Remove the Belt-disc ^.
6. Remove the screw & and then lift the Gear-Pulley * .
7. Lift the Gear-Tray(1) ( .
8. Remove 2 screws and then remove the Motor-DC 1.
9. Remove the Pulley-Motor 2.
10. Remove 1 screw Y and then remove the PCB-SUB switch 3.
11. Remove the Switch-Micro 4 with using the soldering iron.
12. Remove the Connector-Wafer 5with using the soldering iron.
13. Remove 2 screws 6 and then remove the Gear-Cam 7.
14. Remove the Belt-Disc 8.
15. Remove 1 screw Y and then remove the PCB-SUB switch 9.
16. Remove the Switch-Micro 0 and the Connector-Header ".
17. Remove the Pulley-Motor =.
18. Remove 1 screw Q and then lift the Gear-Pulley q.
19. Remove 1 screw W and then lift the Gear-UD(2) w.
20. Lift the Gear-UD (1) E.
21. Remove 1 screw and then remove the Clamp-Wire D.

3-6 CD-PCB

* Refer to U of Figure 3-5.
1. Remove 2 screws !.
2. Remove the PCB @ with using the soldering iron.
3. Remove the Hook #.
4. Remove four Shaft-CD$ and then remove four Rubber-CD %.
5. Remove the CD-Deck ^ and Lever-Lift & is removed automatically.
6. Remove the Shaft *.
Samsung Electronics
Disassembly and Reassembly
3-5