Using The Optical Disc Drive - Sony VAIO VGN-TZ100 Series User Manual

Using the Optical Disc Drive

Except China_BGN
Your computer is equipped with an optical disc drive.
Except China_END
China model_BGN
Your computer may be equipped with an built-in optical disc drive. See the printed Specifications sheet to find whether your
model is equipped with the optical disc drive.
China model_END
To insert a disc
1 Turn on the computer.
2 Press the disc drive eject button (1) to open the drive.
The tray slides out.
If the disc drive eject button does not work, try the substitute drive eject button on the optical disc drive.
If power supply to the optical disc drive is disabled by VAIO Power Management, it will take a while to eject the drive tray. Note that the substitute drive
eject button is disabled when the optical disc drive is not powered.
When recovering your system, turn on your computer and press the substitute drive eject button on the optical disc drive. Insert your Recovery Disc
into the optical disc drive, turn off the computer, and then turn on the computer again to start the recovery process.
3 Place a disc in the middle of the tray with the label side facing upward and gently push it until the disc clicks into place.
n 50 N
Using Your VAIO Computer