Enrolling A Fingerprint - Sony VAIO VGN-TZ100 Series User Manual

China model_END
IRX-3960_END
Except IRX-3960_BGN
In case the hard disk drive has to be initialized, for example after the repair work, the fingerprint templates will be lost.
You will have to enroll them all over again.
Except IRX-3960_END
IRX-3960_BGN
In case the built-in flash memory storage or hard disk drive has to be initialized, for example after the repair work, the
fingerprint templates will be lost. You will have to enroll them all over again.
IRX-3960_END
The maintenance and management of data concerning fingerprint authentication must be carried out at your own risk.
Sony assumes no liabilities for any defects arising out of your data maintenance and management.
Before disposing of your computer or transferring it to a third person, it is strongly recommended you erase the fingerprint
data enrolled on the fingerprint sensor after erasing the data stored on your hard disk drive. See Erasing the Enrolled
Fingerprints (page 155)

Enrolling a Fingerprint

To use the fingerprint authentication functionality, you must enroll your fingerprint(s) in your computer.
Set the Windows password on your computer before enrollment. See Adding the Windows Password
To enroll a fingerprint
!
Up to 10 fingerprints can be enrolled for each user and up to 21 fingerprints can be enrolled for logging onto your system using the Power-on Security
feature. You can also select the finger of which fingerprint you want to use for the Power-on Security feature later.
for the detailed procedure.
Customizing Your VAIO Computer
(page 143) for the detailed instructions.
n 149 N