LAN terminal / USB port / SD card slot
USB devices (memory device, keyboard, mouse) and an SD memory card can be used in APPLICATION mode. You can also
connect to a network.
1. LAN terminal
• You can connect the monitor to a network.
2. USB port
• Connect USB devices (memory device, keyboard, mouse) that you want to use in APPLICATION mode.
• Insert a USB flash drive to be used with Media Player in one of the USB ports indicated by "*" above.
Supported USB flash drives
File System
Capacity
• A USB flash drive that is encrypted or has a security function cannot be used.
• Use a USB flash drive with a shape that can be inserted in the USB port. Some USB flash drives with special shapes cannot
be inserted. Do not forcibly insert a USB flash drive. This may damage the connector or cause failure.
• Android system restrictions may prevent writing to a USB flash drive from an application that you have installed.
3. SD card slot
• Insert an SD memory card.
Supported SD memory cards
File System
Capacity
• Do not use with write protection enabled. Do not use a security function.
• Android system restrictions may prevent writing to an SD memory card from an application that you have installed.
n How to remove a USB flash drive or a SD memory card
1. Select "System Settings" on the CONTENT MENU screen of APPLICATION mode.
2. Select "Storage".
3. Select "Unmount USB storage" or "Unmount SD card" according to the removing device.
4. When displaying the confirmation message, select "OK".
FAT32
Up to 32 GB
(maximum file size 4 GB)
FAT32
• S D memory card : Up to 2 GB
• S DHC memory card : Up to 32 GB
• M aximum file size : Up to 4 GB
Introduction
1
*
2
3
5
E