Table of Contents
Advertisement
SOUND
Go Back
Treble
Bass
Balance
Sound Type
Stereo . . .
SAP
Auto Vol Level
Fixed . . .
Audio Output
Int. Speakers
Chapter 4
Graphics contained within this publication are for representation only.
Chapter 4: Using the TV's Menu System
Sound Menu
Treble Increases or decreases the treble.
Bass Increases or decreases the bass.
Balance Press the right arrow button to increase the audio
output in the right speaker; press the left arrow button to
increase the audio output in the left speaker.
Sound type Press the right arrow button to scroll through
the available audio types, which control the way the sound
comes through your speakers: Mono plays the sound in mono
only. Use this setting when receiving broadcasts with weak
stereo signals; Stereo to split the incoming stereo audio
signal into left and right channels; and Enhanced for
simulated surround sound. Most TV programs and recorded
materials have stereo audio. The word Stereo appears on the
TV when you tune to a program that is broadcast in stereo.
SAP (Second Audio Program)
a second language, if one is available. The TV displays the
word SAP when you tune to a program that is broadcast with
SAP information. SAP audio is broadcast in mono. SAP is also
used to broadcast a program's audio with descriptions of the
video for the visually impaired. Press OK to turn SAP on or
off.
Auto Vol level (Auto Volume Level) Reduces the annoying
blasts in volume during commercial breaks. Eliminates the
need to constantly adjust volume control. Press OK to turn
Auto Vol level on or off.
Audio Output Press the right arrow button to scroll
through the available output settings: Fixed allows fixed
output from the TV's audio output jacks to an external
component, such as a surround sound amplifier; and Variable
allows variable output from the TV's audio output jacks.
Int. Speakers (Internal Speakers) Turns the TV's internal
speakers on or off. Turn off the internal speakers if you have
an audio receiver or amplifier connected to the TV. Press OK
to turn Int. Speakers on or off.
Note: Turning the internal speakers off doesn't affect Alert Guard.
When an alarm sounds or when the NWR is turned on, Alert Guard
will temporarily override this setting.
Plays the program's audio in
29
Advertisement
Table of Contents
