RCA Alert Guard 24F671T User Manual page 15

6. Press the right arrow button to choose another area different than the area set
for My Area. This could be another county, city, parish, area, borough, district,
island, atoll, state or municipality nearby where you are living.
7. If you can't find your location, you need to set it manually. Press the down
arrow button to highlight Location code.
8. Go to pages 37-54 or call toll-free 1-800-NWR-SAME to find the location code
for your area. Enter the code using the number buttons on the remote.
Note: Occasionally the government changes or adds location codes. If you live in a new
county or renamed county, you need to call 1-800-NWR-SAME because the code probably
isn't in the list. Enter the code using the number buttons on the remote. Question marks
(???) will appear in the area above the location code, which is normal since the TV isn't
aware of this new area. Alert Guard will still respond if an alert is received for this location.
To set another area, press the up arrow to highlight Location, and follow steps 2-8.
To exit, highlight and select Go Back or press CLEAR.
You can set each alert level, Warning, Watch or Advisory, to notify you of alerts
broadcasted by receiving a message on-screen or hearing a type of alarm. The
default settings for these alert levels are:
Message
on-screen
Alarm
setting
To change these settings and for more information on how to customize options in
Alert Guard, go to Chapter 3.
Note: If you move from the area you set in the Initial Setup, you need to set your new area in
the Alert Guard LOCATIONS menu.
Chapter 1
Graphics contained within this publication are for representation only.
Warning Watch Advisory
Yes Yes No (box
not checked)
Voice None None
Connections & Setup
11