Specifications - KUSSMAUL 091-215-12 Instruction Manual

SPECIFICATIONS

Input Power: 120 Volt, 60 Hz, 3.5 amperes
Input Fuse: 6 ampere, fast blow
Output Power - Bat : 15 amperes max (18 amperes if Battery Saver is turned off)
Battery Type
Lead-Acid
Gelled Electrolyte
AGM
Odyssey®
Output Power - Battery Saver: 13 Volts DC, 3 amperes max
Remote Sensing: Electronic, sense wires not required
LED Status Indicators:
Power: Green LED, Indicates 120 Volt AC power applied
System: Yellow LED:
Fast Flash (5 times per Second) indicates battery reverse polarity
Slow Flash (once per second) indicates no battery is connected
Solid On indicates charger is in current limit (normal operation)
Solid Off indicates normal operation
Brief Flash (once every 2 seconds) indicates 3-step boost mode operation
Cooling Fan: The whisper quiet cooling fan exhausts air from the rear of the charger. When the
Battery Saver is enabled, it is continuously on while AC power is applied to the charger. It turns on at
4 amperes of output current and turns off at 3 amperes when the Battery Saver is disabled.
Torque: DC Output Connector: 15 in. lbs.
Remote Display Options: Bar Graph Display, Deluxe Status Center or Watertight Status Center
Output Waterproof Circuit Breaker (Optional): Bat 1 - 40 amperes, P/N: 090-0040-0
Output Buss Bar (Optional): 5 Studs, P/N: 002-3595-5
Weight: 11 pounds
170 Cherry Avenue
West Sayville, NY 11796
www.kussmaul.com
Float V DC
13.25
13.50
13.50
13.60
Absorbtion V DC
14.00
14.25
14.40
14.70
Ph: 800-346-0857
Fax: 631-567-5826
sales@kussmaul.com
8