Dvd Player + Tv + Dolby Pro Logic Or Stereo Receiver - RCA RC5920P User Manual

DVD Player + TV + Dolby Pro Logic or Stereo
Receiver
To Connect the DVD Player
1. Connect the left and right audio cables to your audio/video receiver and to the AUDIO OUT FRONT L
(left – white) and R (right – red) jacks on the back of your DVD Player.
2. Connect the video cable.
A. Basic video connection – Connect the video cable (yellow) to the VIDEO OUT jack on the back of
your DVD Player, and to the Video Input jack on your TV.
B. S-Video – (optional) If your TV has an S-Video Input jack, connect the S-Video cable to the S-
VIDEO OUT jack on the back of your DVD Player and to the S-Video jack on your TV. If your TV
doesn't have S-Video, use the basic video connection listed above.
C. Component video (optional) – If your TV has component video (Y, P
cables for the Y, P , and P
B
with a compatible TV. If your TV doesn't have component video, use the basic video connection or the
S-Video connection listed above.
3. Plug in the AC power cord into an AC outlet.
Chapter 1
OR
OR
connections. Note that it is essential to match the color coded connectors
R
Connections & Setup
, and P jacks) use video-grade
B R
Go to page 20
15