M
H
OUNTING
3 - 1/4" Spacers
3 - 1/2" Spacers
3 - 1" Spacers
3 - 2 3/4" Phillips head screws
OR
3 - 1 5/8" Phillips head screws
B
M
EFORE
OUNTING
Empty the contents of the cabinet under which the unit is to be mounted
and thoroughly clean the underside to remove any greasy residue. We
recommend the unit be mounted at the front edge of the cabinet.
IMPORTANT: For secure mounting, the screws must go into the unit
to a depth of at least 3/8" If the overall length from the bottom of the
cabinet shelf to the bottom of the overhang is more than 1 3/4", you
will need to use a wood shim. The shim can be located between the
cabinet shelf bottom and the spacers. Make sure the wood is at least
as thick as the excess over 1 3/4". If a shim is necessary, longer screws
(available at most local hardware stores) are required.
Cut out the template on the line indicated. The template size and screw
hole positions are identical to the top of the unit.
P
ARDWARE
ACKED WITH
Y
OUR
3 - Washers
2 - Cord hooks
1 - Mounting
template
U
:
NIT
Fig.10
Fig. 9
11