Connection: Tv + Vcr - RCA MR14400, MR20400 User Manual

1A

Connection: TV + VCR

1. Connect your TV to your VCR
A. Connect a coaxial cable to the ANT. jack on your TV and to the Output Jack on your VCR
(sometimes labeled OUT TO TV).
B. OPTIONAL: Connect the white audio cable to the AUDIO IN jack on the back of the TV and to
the Audio Output Jack on the VCR. If you have a stereo VCR, use the L/MONO jack on the
back of the VCR to make this connection. Let the red audio cable hang.
C. OPTIONAL: Connect the video cable (yellow) to the VIDEO IN jack on the back of the TV and
to the Video Output Jack on the VCR.
2. Connect cable or antenna to your VCR
Connect the coaxial cable from your cable outlet, cable box, or antenna to the Input Jack on your
VCR (sometimes labeled IN FROM ANTENNA or IN FROM ANT).
Chapter 1
TV (back panel)
VIDEO IN AUDIO IN
ANT
1C 1B
VCR
VIDEO AUDIO
Connections & Setup
IN FROM ANT
CH3
CH4
OUT TO TV
2
From Cable or
Antenna
Go to page 10
7