Fujitsu ASU18RLF Design & Technical Manual page 30

5) Remote controller custom code
(Only for wireless remote controller)
The indoor unit custom code can be changed. Select the appropriate custom code.
Function number
44
6) External input control
"Operation/Stop" mode or "Forced stop" mode can be selected.
Function number
46
7) Room temperature sensor switching (Aux.)
To use the temperature sensor on the wired remote controller only, change the setting to "Wired
remote controller" (01).
This function will only work if the function setting 42 is set at "Both" (01).
When the setting value is set to "Both" (00), more suitable control of the room temperature is pos-
sible by setting function setting 30 and 31 too.
Function number
48
Setting value
00
01
02
03
Setting value
00
01
02
Setting value
00
01
- 26 -
Setting description
A
B
C
D
Setting description
Operation/Stop mode
(Setting prohibited)
Forced stop mode
Setting description
Both
Wired remote controller
Factory setting
♦
Factory setting
♦
Factory setting
♦