Transfer Roller - Samsung ML-5200A Service Manual

3-3 Transfer Roller

1. Open the front cover with hand.
2. Remove the transfer roller cap.
Cap
3-4 Top Cover and Rear Cover
1. Before you remove these covers, you should
remove:
-Front cover (see page 3-2)
2. Remove five screws.
3. Unlatch the tabs on the left and right side end of
the cover, then take out the rear cover.
coin screw
Samsung Electronics
Unlatch the tabs at both
sides to remove the cover.
3. To remove the transfer roller, pull up the tab to
release the roller, then take it out.
4. Remove two screws, and remove the top cover.
Disassembly and Reassembly
3-3