Panel Board And Board Cover; Transfer Roller - Samsung ML-5000A Service Manual

3-3 Panel Board and Board Cover

1. Before you remove these parts, you should
remove:
-Face up cover and Front cover
(see page 3-1)
2. From the front cover, remove two screws,
then remove the board cover.

3-4 Transfer Roller

1. Open the front cover with hand.
2. Remove the transfer roller cap.
Cap
Samsung Electronics
Panel board
Board cover
3. To remove the transfer roller, pull up the tab to
release the roller, then take it out.
Disassembly and Reassembly
3-3