What To Expect - RCA F27450 F27450 User Manual

Downloading Data
The GUIDE Plus+ system is not available until it completes its first download of program information. T o
ensure that your first download of data is complete, you should leave your TV off overnight. If you use a cable
box, be sure to leave it on. Downloads occur several times a day . The TV must be turned off for GUIDE Plus+
system data to download.

What to Expect

The next time you turn on your TV, the GUIDE Plus+ system will appear on the screen. The following examples
explain what you might see:
• If all of the program information has been sent to your TV, the GUIDE Plus+ system appears with all of
your TV program listings.
• If the program information hasn't been sent to your TV yet, an outline of the GUIDE (without TV program
listings) will appear on the screen. Program information is usually sent to your TV at night.
• If the TV detected multiple cable companies in your area, you'll need to select a channel lineup.
Features of the GUIDE Plus+ system are explained in Chapter 3.
To clear the guide from your screen, press CLEAR or GUIDE on the remote control.
Chapter 1
Connections & Setup
Step 2: Configuring for Cable
The next series of screens asks you about your cable setup.
If you use a cable box, you will need to identify the channel you
tune your TV to when using the cable box, and the brand of
cable box
If your brand is not listed, choose "not listed" to run the test.
Follow the on-screen instructions to test your cable box.
Step 3: Configuring for a VCR
The next series of screens asks you about your VCR setup.
If you connected a VCR to the TV, you will need to follow the
on-screen instructions to select your brand of VCR and run a
system test so that the one-touch record feature will work
properly.
Notes:
If your VCR brand isn't listed, choose the Not Listed option.
Leave the cable box on to download program listings. Leave your
VCR off to record programs with the Guide Plus+ One-Touch
Record feature.
Step 4: Confirming Your Settings
• Check to make sure all settings are complete and correct. If
all settings are complete, highlight Yes, end setup and press
OK. If your cable box and/or VCR code testing failed, you
should see INCOMPLETE where the cable box and VCR codes
are listed. Once setup is complete, additional screens appear .
If any settings are incomplete or incorrect, highlight No,
repeat setup process and press OK. Follow the instructions
on the screen.
• You can choose to view a demo of the GUIDE Plus+ features,
which may take a few minutes to load. If you don't want to
see the demo right now , press OK to watch TV.
7