How To Use Your Tv's Menu System; Audio Menu - RCA F27450 F27450 User Manual

Chapter 4: Using the TV's Menu System

How to Use Your TV's Menu System

Use the buttons on the remote or the front of your TV to access the menu system and make changes to the
settings.
Menus
Press MENU on the remote or on the front panel to bring up the Main menu. Note that holding MENU for 2
seconds displays the GUIDE Plus+ system.
Menu choices take you to another menu or a control panel. There are two ways to select a choice in a menu:
• Use the arrow buttons on your remote to highlight your choice, and press OK.
• Press a number button on the remote. For example, in the Main menu press 3 to go to the Screen menu.
Exiting a menu
There are three ways to exit a menu:
• Highlight Exit and press OK.
• Press 0 on the remote.
• Press CLEAR. The on-screen displays are cleared from the screen and you return to TV viewing.
AUDIO
1 Mute
2 Tone Controls
3 Audio Processor
4 Audio Output & Speakers
0 Exit
Mono Plays the sound in mono only . Use this setting when receiving broadcasts with weak stereo signals.
Stereo Splits the incoming stereo audio signal into left and right channels. Most TV programs and
recorded materials have stereo audio.
Expanded Stereo Electronically "widens" sound from stereo broadcasts, stereo VCRs, digital satellite
systems, DVD players, and laserdisc players for a fuller , more spacious sound.
™
Sound Logic Stereo Reduces the annoying blasts in volume during commercial breaks, and also
amplifies softer sounds in program material. Eliminates the need to constantly adjust volume control.
Second Audio Program (SAP)
word SAP appears on the TV when you tune to a program that is broadcast with SAP information. SAP
audio is broadcast in mono. SAP is also used to broadcast a program' s audio with descriptions of the video
for the visually impaired.
Audio Output & Speakers
and set the audio outputs to fixed-level or variable control level.
Variable Output, Speakers On
the TV's audio output jacks.
Variable Output, Speakers Off
the TV's audio output jacks to an external component such as a surround sound amplifier .
Fixed Output, Speakers Off
audio output jacks to an external component such as a surround sound amplifier . When you choose Fixed
Output Off, the TV's volume control, tone controls, and mute are disabled.
Chapter 4

Audio Menu

Mute Press OK to reduce the TV' s volume to its minimum level.
Press OK again to restore the volume.
Tone Controls Displays the slider controls for adjusting the
TV's treble, bass and balance.
Audio Processor Displays a choice list of available audio
modes, which control the way the sound comes through your
speakers. You can also access the AUDIO PROCESSOR menu by
pressing the SOUND button on the remote.
Plays the program' s audio in a second language, if one is available. The
Displays a choice list that lets you turn the TV' s internal speakers on or off,
This setting turns the TV' s speakers on and allows variable output from
This setting turns the TV' s speakers off and allows variable output from
This setting turns the TV' s speakers off and allows fixed output from the TV' s
21