The Buttons On The Remote Control - RCA F27450 F27450 User Manual

Chapter 2: Using the Remote Control
L.E.D.
ON OFF
VCR1
DVD VCR2 AUX SAT CABLE
MUTE SKIP
SOUND
GO BACK
GUIDE INFO
OK
MENU
CLEAR
1 2 3
4 5 6
8 9
7
WHO INPUT ANTENNA
0
REVERSE PLAY FORWARD
REC•VCR+ STOP PAUSE
8

The Buttons on the Remote Control

0-9 (Number buttons) Enter channel numbers and time settings
through the remote control.
To enter a two-digit channel, press the two digits. T o enter a three-digit
TV
channel, press and hold the first digit for two seconds until two dashes
appear to the right of the number , then add the second two. Example: to
tune to channel 123, press and hold 1 for two seconds, press 2, then
press 3.
Arrow buttons Move through the on-screen menu system.
ANTENNA Functions as TV/VCR button in VCR mode and TV/receiver
button in SAT•CABLE mode.
AUX Program this button to control a cable box, RCA audio
components, a VCR or satellite receiver . If you set up the Auto T uning
feature (Chapter 3), pressing the AUX button automatically tunes the TV
to the correct channel.
CH (up and down) Press once to change the channel up or down; press
and hold to continue changing channels.
CLEAR Removes any menu or display from the screen and returns you to
TV viewing.
DVD Puts the remote in DVD mode. If you set up the Auto T uning
feature (Chapter 3), pressing the DVD button tunes the TV to the correct
channel.
FORWARD Press FORWARD to advance a videotape or disc.
GO BACK Returns you to the previous channel.
GUIDE Displays the GUIDE Plus+ system; press GUIDE again to remove it
from the screen.
INFO Displays channel information.
L.E.D. (light-emitting diode) The light on the remote that lights when
you are programming the remote. It also lights when you press a valid
button on the remote.
MENU Displays the TV's Main menu. You can also press and hold for 2
seconds to display the GUIDE Plus+ system.
MUTE Lowers the volume to its minimum level. Press again to restore
volume.
OK When a menu is on the screen, press OK to select the item that is
highlighted.
ON•OFF Turns the TV on and off. When the remote is in another mode
(VCR, DVD, Satellite, etc.) and the remote is programmed to operate that
component, press ON•OFF to turn the component on and off.
PAUSE Press PAUSE when the videotape or disc is playing to pause
playback.
PLAY Plays a videotape or disc.
REC•VCR+ When the GUIDE Plus+ program guide is on the screen, press
REC•VCR+ to program your VCR to record a program. If the remote is in
VCR mode, press REC•VCR+ to start recording.
Chapter 2