Operations - Bissell PROHEAT PET ADVANCED 1799 Series User Manual

Rinsing Your Carpet (optional)
Rinsing is an optional step that can be done during the cleaning process by switch-
1
ing to the water rinse setting, or it can be done after the carpeted area has been
cleaned.
Choose the Water Rinse setting on the SmartMix® dial, Be sure to rinse out your
tank if Boost was added in with your water. Use the Water Rinse setting with water
only. Follow the same path as you did for cleaning, taking care to do a forward
(wet) stroke by depressing the trigger, a backward (wet) stroke, and a forward and
backward (dry) stroke, releasing the trigger. Continue this until the water you see
coming up the nozzle is clear.
Operations: Empty the 2-in-1 Tank
1
1- Press the Power Switch to the OFF position. Remove the
2-in-1 Tank from the base by lifting up with the tank's Carry
Handle.
2- Carry the tank like a bucket to where you'll dispose of the
collection water. Rotate the carry handle to unlatch the lid and
empty the tank.
NOTE: You may notice hair & debris deposits on the carpet or in the tank that
were loosened by the cleaning action (especially with new carpet that may never
have been deep cleaned before). This debris should be picked up and thrown
away.
To Continue Cleaning...
1
1- Fill the 2-in-1 Tank
again, following the
instructions on pages 8
and 9.
2- Make sure the tank lid is secure and return the tank to
the machine. Follow cleaning instructions on pages 10
and 11 to continue cleaning. *Don't forget to check the
formula tank and refill as needed!
12
www.BISSELL.com
2
2
To maintain maximum
suction, remove and rinse
lint screen located on the
tank lid after each use.
3
Rinse (optional)
Choose the Water Rinse
setting on the SmartMix®
dial and follow rinse
instructions at the top of
this page.