Removing Staple Jams From The Saddle Stitcher Unit - Canon FINISHER-C1 Service Manual

4) Hold the empty cartridge on its sides, and
remove it.
Figure 1-333
5) Fit the new cartridge.
Figure 1-334
Caution:
You must always replace both cartridges at
the same time.
6) Pull the stitcher to the front once, and then
put it back to its original position.
Figure 1-335
COPYRIGHT © 1998 CANON INC. FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 1 GENERAL DESCRIPTION
7) Push in the stitcher unit, and close the front
cover.
Figure 1-336
F. Removing Staple Jams
from the Saddle Stitcher
Unit
(Saddle Finisher-C2)
If the copier indicates the saddle stitcher
unit staple jam message, perform the follow-
ing to remove the jam.
1) Open the front lower cover.
Figure 1-337
1-15