Advertisement
If your cable box has its own remote
to change channels,
you will
probably
be able to program
the TV's
remote to control both the TV and
the cable box.
The TV's remote is designed
to
control several brands of cable
boxes.
To program
the remote, just
press CABLE,
then ID, then the two-
digit code number for your brand of
cable box. Refer to the chart below
to find the code number for your
cable box.
Press the OFF/ON
button
next to confirm
operation.
You may need to try each of the code
numbers
listed for your brand until
you find the one that works.
After the TV's remote is
programmed,
you'll be able to turn
on the cable box by pressing
CABLE,
then OFF/ON.
You can change
channels
on the cable box by
pressing the CHANNEL
buttons
whenever
the remote is in the "cable"
mode.
To put the remote in the
"cable"
mode, press the CABLE
button.
Press the TV button to put
the remote back into the TV mode so
the remote buttons will control the
TV again.
Programming
Remote To Control Cable
Box
-(with
remote only)
1. Refer to the chart below to find the
code number that corresponds to the
brand name of your cable box. Keep
this number in mind. If more than
one number is listed, you may need
to try each one separately until you
find the one that works.
2. Press CABLE button on remote.
3. Press 11) button on remote.
5. Point the remote at the cable box and
press the OFF/ON button to test the
code number.
• If the right number was entered, the
cable box should turn on. Pressing
the CHANNEL buttons should then
also change channels on the
cable box.
• If the cable box does not react to
the remote (or if the remote turns
on the cable box but does not
change channels), repeat steps 1
thru 5 with another code number.
4. Press two number buttons (first one,
then the other) to enter the code
number for your brand of cable box.
Note: You must press the two number
buttons within three seconds of pressing
the ID button.
Operating
Notes:
• After the remote is programmed, it will
turn on the cable box whenever you press
CABLE and then OFF/ON.
• To turn off the cable box, press CABLE,
then OFF/ON.
• To change channels on the cable box,
press CABLE then CHANNEL up or down.
• You may have to reprogram the remote
control if you change its batteries.
Try
not to press any buttons while changing
batteries.
Anvision .....................................................................................
07,08
Cablestar .....................................................................................
07,08
Eagle ................................................................................................
08
Eastern International ............................................................
........... 02
General Instrument .......................................
04,05,15,23,24,25,30,36
Hamlin ...................................................................................
12,13,34
Hitachi ........................................................................................
37,43
Jerrold ...........................................................
.04,05,15,23,24,25,30,36
MACOM .............................................................................
_...... 37,43
Magnavox ...........................................
07,08,19,26,28,29,32,33,40,41
NSC .................................................................................................
09
Oak ........................................................................................
01,16,38
Oak Sigma .......................................................................................
16
Panasonic ....................................................................................
27,39
Philips .................................................
07,08,19,26,28,29,32,33,40,41
Pioneer ........................................................................................
18,20
Randtek .........................................................
. ............................. 07,08
RCA .................................................................................................
27
Regal ...........................................................................................
12,13
Regency ...........................................................................................
02
Scientific Atlanta ........................................................................
03,22
Sylvania ................ ...........................................................................
11
Teknika ............................................................................................
06
Texscan .......................................................................................
10,11
Tocom .........................................................................................
17,21
Unika ...............................................................................................
31
Viewstar ..............................................
07,08,19,26,28,29,32,33,40,41
Zenith .........................................................................................
14,42
Note: Refer to the information sheet packed with your remote control for the latest list of brand names and code numbers.
Because this list
is constantly growing, the information sheet packed with your remote control may be a later version of this list and contain additional
brands and/or code numbers.
35
Advertisement
