Cisco cBR Series Configuration Manual page 39

Advanced-Mode DOCSIS Set-Top Gateway 1.2 for the Cisco CMTS Routers
DSG Example with Regionalization Per Downstream
In this configuration, and given the two Cisco CMTS Headends cited earlier in this topic, below are two
downstream rules that can be configured in this architecture, for example:
• Downstream Rule #1
• Downstream Rule #2
DSG Example with Regionalization Per Upstream
In this configuration, and given the two Cisco CMTS Headends cited earlier in this topic, below are two
upstream rules that can be configured in this architecture, for example:
• Upstream Rule #1
• Upstream Rule #2
Example of Two DSG Tunnels with Full Classifiers and MAC DA Substitution
In this configuration, and given the two Cisco CMTS Headends cited above, below are the two sets of DSG
rules, with each set applying to each Cisco CMTS, in respective fashion.
These settings apply to DSG #1:
• DSG Rule ID 1
• Downstreams 1 and 2
• DSG Client ID 101.1.1
◦ DSG Rule ID #1
◦DSG Client ID—101.1.1
◦DSG Tunnel Address—105.5.5
◦ DSG Rule ID #2
◦DSG Client ID—102.2.2
◦DSG Tunnel Address—106.6.6
◦ DSG Rule ID #1
◦DSG Client ID—101.1.1
◦DSG UCID Range—0 to 2
◦DSG Tunnel Address—105.5.5
◦ DSG Rule ID #2
◦DSG Client ID—102.2.2
◦DSG UCID Range—3 to 5
◦DSG Tunnel Address—106.6.6
Cisco cBR Series Converged Broadband Routers Application—Voice and Video Configuration Guide
Configuration Examples for Advanced-Mode DSG
33