Cisco cBR Series Configuration Manual page 22

Converged broadband routers application - voice and video configuration guide
Hide thumbs Also See for cBR Series:
Table of Contents

Advertisement

Configuring Global Tunnel Group Settings for Advanced-Mode DSG 1.2
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
What to Do Next
Troubleshooting Tips
Refer to debug and show commands in the
Gateway Feature, on page
Cisco cBR Series Converged Broadband Routers Application—Voice and Video Configuration Guide
16
Command or Action
cabledsg tggroup-id [channel channel-id
[ucid ID1 ]]
Example:
Router(config)# cable dsg tg 1 channel
1 ucid 1
cable dsg tg group-id [channel channel-id
[vendor-param vendor-group-id ]]
Example:
Router(config)# cable dsg tg 1 channel
1 vendor-param 1
cable dsg vendor-param group-id vendor
vendor-index oui oui value value-in-TLV
Example:
Router(config)# cable dsg vendor-param
1 vendor 1 oui ABCDEA value 0101AB
cable dsg chan-list list-index index
entry-index freq freq
Example:
Router(config)# cable dsg chan-list 1
index 1 freq 47000000
cable dsg timer inde [Tdsg1 Tdsg1 ] | [
Tdsg2 Tdsg2 ] | [Tdsg3 Tdsg3 ] | [ Tdsg4
Tdsg4 ]
Example:
Router(config)# cable dsg timer 1 Tdsg1
1 Tdsg2 2 Tdsg3 3 Tdsg4 4
end
Example:
Router(config)# end
29.
Advanced-Mode DOCSIS Set-Top Gateway 1.2 for the Cisco CMTS Routers
Purpose
Sets the upstream channel or channels to which
the DSG 1.2 tunnel applies.
Sets the vendor-specific parameters for upstream
DSG 1.2 channels.
Configures vendor-specific parameters for A-DSG
1.2. To remove this configuration from the Cisco
CMTS, use the no form of this command.
Configures the A-DSG 1.2 downstream channel
list. The channel list is a list of DSG channels
(downstream frequencies) that set-top boxes can
search to find the DSG tunnel appropriate for their
operation. To remove the A-DSG 1.2 channel list
from the Cisco CMTS, us the no form of this
command.
Configures the A-DSG 1.2 timer entry to be
associated to the downstream channel, and
encoded into the Downstream Channel Descriptor
(DCD) message. To remove the cable DSG timer
from the Cisco CMTS, use the no form of this
command.
Returns to privileged EXEC mode.
How to Monitor and Debug the Advanced-mode DOCSIS Set-Top

Advertisement

Table of Contents
loading

Table of Contents