Included Accessories - Husqvarna Viking Tribute 140C User Manual

INCLUDED ACCESSORIES

Presser Feet
Utility Foot A
Attached on the machine upon delivery. This foot is used mainly for straight stitching and zigzag stitching
with a stitch length longer than 1.0.
Utility Foot B
When sewing decorative stitches or short zigzag stitches and other utility stitches with less than 1.0 mm
stitch length, use this foot. The tunnel on the underside of the foot is designed to feed smoothly over the
stitches.
Buttonhole Foot C
This foot is used for sewing buttonholes step by step. Use the guide lines on the toe of the foot to position
the garment edge. The two tunnels on the bottom of the foot ensures a smooth feed over the buttonhole
columns. The nger on the back of the foot holds cording for corded buttonhole.
Blind Hem Foot D
This foot is used for blind hem stitches. The inner edge of this foot guides the fabric. The right toe of the
foot is designed to ride along the hem edge.
Zipper Foot E
This foot can be snapped on either to the right or to the left of the needle, making it easy to sew close to
both sides of the zipper teeth. Move needle position to right or left to sew closer to zipper teeth or for
covering large cording.
Non-Stick Glide Foot H
This foot, with a non-stick coating underneath, is used when sewing foam, vinyl, plastic, or leather to
minimize the risk of these materials sticking to the foot.
Edging Foot J
This foot is used for overcasting and seam/overcasting. Stitches form over the pin which prevents puckering
at the edge of the fabric.
Embroidery/Darning Foot R
For free-motion darning, quilting and embroidery.
Sensor One-Step Buttonhole Foot
When connected to the machine, the buttonhole is sewn in a suitable length to the button size that has been
entered into the machine.
1
2 3
6
6
5
4
8
10
1. Non-Stick glide plates (2)
2. Light bulb remover
3. Seam ripper
4. Brush
7
5. Screwdriver
6. Felt pad (2)
7. Extra spool caps, one large, one small
8. Bobbins (5)
9. Multipurpose tool/ button reed
10. Thread nets. Slide on the spool when using
synthetic threads that easily unwind (2)
Needles (not pictured)
9