System Password - Toshiba Portege X20W-D User Manual

When your computer battery capacity is too low to continue, "System ON
CDP Charge Mode" might not work. In those cases, connect the AC
adaptor and reboot the computer.
Always use the USB cable that was included with your USB device.
When "System ON CDP Charge Mode" or "USB Sleep and Charge
function" is enabled, the "USB Wakeup" function might not work. In that
case, use a USB port without "USB Sleep and Charge function" or disable
both "System ON CDP Charge Mode" and "USB Sleep and Charge
function".

System Password

System Password tab allows you to set a password in order to restrict
access to the computer. Two levels of password security are provided:
User and Supervisor.
Passwords set by System Password function are different from the
Windows password.
User Password
To set user password, click Start -> TOSHIBA -> TOSHIBA Settings ->
System Password.
User authentication might be required to validate user rights when using
System Password to delete or change passwords, and so on.
User's Manual
Set (button)
Click this button to register a password. After a password is set, you
are prompted to enter it when you start the computer.
After you set the password, a dialog box appears asking whether you
want to save it to other media. If you forget the password, you can
open the password file on another computer. Be sure to keep the
media in a safe place.
When entering the character string to register the password, enter
from the keyboard character by character and do not enter as ASCII
code or copy-and-paste the character string. In addition, ensure that
the registered password is correct by outputting the character string to
the password file.
When entering a password, do not enter any characters (for example
"!" or "#") produced by pressing the SHIFT or ALT keys.
Delete (button)
Click this button to delete a registered password. Before you can
delete a password, you must first enter the current password correctly.
5-5