Enclosure Extension; Type Code - ABB ACS800 Hardware Manual

24

Enclosure extension

The extension can be used for accommodating customer equipment; it is also
automatically added whenever required by factory-installed options such as
• switch fuse (always included with the enclosure extension)
• line contactor with Category 0 emergency stop devices (start/stop and emergency
stop switches included)
• thermistor relay(s)
• Pt100 relays
• top cable entry/exit
• additional I/O terminal block.

Type code

The type code contains information on the specifications and configuration of the
drive. The first digits from left express the basic configuration (e.g. ACS800-02-
0170-5). The optional selections are given thereafter, separated by plus signs (e.g.
+E202). The main selections are described below. Not all selections are available for
all types. For more information, refer to ACS800 Ordering Information (EN code:
64556568, available on request).
Type code selections for the ACS800-02
Selection
Product series
Type
Size
Voltage range
(nominal rating in bold)
+ options
Construction
Resistor braking
Filter
Line options (+C111 or
+C127 required)
Cabinet options (+C111 or
+C127 required)
Cabling
The ACS800-02/U2
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Alternatives
ACS800 product series
02 free standing. When no options are selected: 6-pulse diode input bridge, IP 21,
Control Panel CDP312R, no EMC filter, Standard Control Program, no enclosure
extension, cabling from below, boards without coating, one set of manuals.
Refer to Technical data: IEC data
2 208/220/230/240 VAC
3 380/400/415 VAC
5 380/400/415/440/460/480/500 VAC
7 525/575/600/690 VAC
C111 enclosure extension (bottom entry/exit, switch fuse with aR fuses)
C127 US enclosure extension (US door interlock disconnect switch fuse with T/L fuses,
US gland/conduit plate, all components UL/cUL approved)
D150 brake chopper
E202 EMC/RFI filter for first environment TN (grounded) system, restricted (the A limits)
E210 EMC/RFI filter for second environment TN/IT (grounded/ungrounded) system
E208 common mode filter
F250 line contactor
Q951 emergency stop of category 0
F251 gG line fuses
G304 115 VAC auxiliary voltage transformer
H351 top entry (+C111+H353 required)
H353 top exit (+C111+H351 required)
H358 US/UK gland/conduit plate
or NEMA data