Removing the power button
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
base
2
Remove the battery.
3
Remove the
solid-state
4
Remove the
heat
5
Remove the fans.
6
Remove the
system
Procedure
NOTE: Only steps 1 and 3 need to be performed if the power button does
not have the optional fingerprint reader.
1
Remove the two screws (M1.4x1.7) that secure the power button to the palm-
rest assembly.
2
Remove the screw (M1.6x1.5) that secures the fingerprint-reader board to the
palm-rest assembly.
3
Lift the power button from the palm-rest assembly.
4
Peel and lift the power button cable from the keyboard.
54
computer. After working inside your computer, follow
After working inside your
cover.
drive.
sink.
board.
computer. For more safety best
www.dell.com/
Before