Procedure (Max Resolution) - Denon AVR-S730H Troubleshooting Manual

Introduction How to operate

Procedure (Max Resolution)

When the TV doesn't play a video's content (4K), there are two approaches to this
issue.
1. To change to a new HDMI cable.
2. To set the limit mode (Max Resolution). As a result, the player outputs a lower
resolution.
Video Content(4K)
1
Use ui to select "5 Limit Mode" in the HDMI DIAGNOSTICS
mode, then press ENTER.
5 Limit Mode
2
Use ui to select "2 MaxRes:***", then press ENTER.
("***" indicates the currently set backup information. In the example shown,
"4K(3G)" is displayed.)
2 MaxRes:4K(3G)
Cable Test Limit mode
3
Select the maximum resolution to be set and press the ENTER
button.
(In the example shown the setting is changed from "4K(3G)" to "1080p". "*"
indicates the currently set backup information.)
The AV Receiver limits the Input Resolution by changing the EDID.
No Picture
4
Check whether the video is output.
Video Content (1080p)
15
Log & EDID Troubleshooting
–*1080p
Video Content (1080p)