Using The Timer - Indesit VIX644CE Service Information

Indesit Company

Using the Timer

All the cooking zones can be programmed for a cooking time duration between 1 and 99 min.
1. Activate the timer by pressing the INCREASE or REDUCE TIME buttons. A beep sounds, the
timer display shows a '00' and the cooking zone displays show a 't' blinking indicating that a
cooking zone has to be selected.
2. Select the desired cooking zone by pressing any of the cooking zones (+) or (-) keys. A beep
sounds, the LED next to the cooking zone display starts blinking if no power is selected, or is on if
any power is selected.
The timer display starts blinking indicating that the time has to be selected.
3. Set the desired cooking time by pressing again the INCREASE or REDUCE TIME buttons.
The user can only set the timer on one heater, but can still use the other heaters normally.
Pressing and holding the (+) and (-) keys increases the speed of time selection.
If the time is not selected before 10 seconds, the timer is switched off.
If the selected time is '00' after 10 seconds the timer is switched off.
Starting Timer Countdown
The countdown starts 10 seconds after the last operation over the INCREASE (+) / REDUCE (-) TIME
buttons.
If any power is selected, a beep sounds and the timer display stops blinking. The same happens to the
LED heater.
The last minute will be displayed in seconds.
When the timer is in countdown the user can change the time at any time by touching the INCREASE
or REDUCE TIME buttons. Then the countdown stops and the timer changes to time selection status
waiting a time selection.
End of Timer Countdown
When the time set on the timer has elapsed the timed heater is switched off, the timer display and the
timed heater LED starts blinking and a timer alarm beep sounds for one minute. The timer alarm can
be cancelled by the user at any time, even during the first minute of the alarm.
When the timer is in alarm status, by pressing any key of the touch control the timer is switched off.
To cancel the operation of the timer, select the time value of '00' pressing the (+) and (-) TIME buttons
at the same time.
When all the cooking zones are not powered, and one of them is temporized at zero power level, the
key-lock function is activated after 1 minute.
Control Panel Lock
When the hob is switched on, it is possible to lock the oven controls in order to avoid accidental
changes being made to the settings (by children, during cleaning, etc.).
Press the button to lock the control panel: -the icon will illuminate and an audible beep sound will
be emitted.
Service Manual UK
19 of 33
English