Select The Date, Time, Or Title To Record - RCA CC634 User Manual

Recording
Select the Date, Time, or Title You Want to Record on Your Tape
The clock cell must be installed, and the date and time set before they can be selected
and recorded. When the scene select AE dial is in AUTO, the auto date mode is
automatically selected.
1. Attach a power supply and place
POWER switch in CAMERA. The
power indicator will light.
2. Make sure the scene select AE dial is
not set to AUTO.
3. Press MODE until DISPLAY appears
beside the F2 button in the display
panel. DISP. appears in the
2
F
viewfinder.
4. Repeatedly press F2 to select the date,
time, or title you want to record.
• Date Display: The date will be
displayed and recorded.
• Auto Date: The date will be
automatically recorded for
approximately five seconds.
48
1
F
TITLE
DISPLAY
• Date/Time Display: The date and
time will be displayed and recorded.
• TV On-Screen Display: The
viewfinder displays will appear on
the screen of a TV connected to the
camcorder during record pause. In
this mode the date will be displayed
and recorded.
Note: This mode is not available during
recording.
• Date Off: No date or time will be
displayed or recorded.
• Title Display: The title you created
will be displayed and recorded.
Note: If no title has been created, SET
CHAR appears and a title can be created.
Details are on page 45.
DISP.
TITLE
2
F
TAYLOR WAYNE