Table of Contents
Advertisement
TROUBLESHOOTING
This VCR is highly sophisticated. It is shipped from the factory after having been checked
and adjusted under the most rigid quality control and inspection system. Should problems
occur, check the following points.
The remote control
I
The batteries are low.
unit doesn't operate
No TV progrsmmes
Are the connections between your VCR and TV correct?
received
Was
tuning
correctly
preset?
Off the air reception
I
The video channel setting of the TV receiver does not
on the VCR is
Door
correspond to the video channel txesettina of the VCR.
Piaybsck picture doss
.
The video channel setting of the TV receiver does not
not appear
correspond to the video channel presetting of the VCR.
interference in
I
Adjust the tracking control.
piayback picture
Dust or diti on video heads. Take the VCR to an Authorized
Service Station or dealer.
No
recording
The erasure-prevention tab on the cassette has been
I
removed.
Timer recording is not
The starting day and time have not been set correctly.
poesibie
I .
The clock time is not set correctly.
I
There has been a power interruption of more than 60
I
minutes.
The main menu does
not appear.
The G-CODE button
doss not function.
The VCR has not been preset as described under
"VCR
Presenting".
If the VCR displays "—:——"and the welcome screen
appears on the TV, because the VCR is connected for the
first time or because the power has failed or has been
disconnected for more than 1 hour, first set the
"LANGUAGE
and the
"CLOCK".
18
Advertisement
Table of Contents
