Table of Contents
Advertisement
SPECIAL PLAYBACK
I
Forward search
•1
•1
Press the FFEF button during playback or fast-forward
operation. The picture can be viewed while the tape is
advanced at a fast speed.
Normal playback will resume as the PLAY>
button is
pressed.
I Reverse search
I
Press the 44REW button during playback or rewind
operation. The picture can be viewed while the tape is
rewound at a fast speed.
Normal playback will resume when the
PLAY>
button is
pressed.
Note:
To search for a particular scene you can switch from
fast forward to forward search and vice versa by simply
pressing the FFM
button, or from rewind to reverse
search by simply pressing the 44
REW
button.
Still picture
Press the II PAUSE/STILL
button during playback. A still
picture can be viewed.
Normal playback will resume when the PLAY-
button is
pressed.
Stiii verticai iock adjustment
If the still picture moves up and down, press the (+, -)
buttons to adjust the still picture.
COUNTER MEMORY
Frame advance
I
El
Press the II PAUSESTILL
button during still playback to
advance the picture frame by frame. Each press advances
one frame.
Normal playback will resume when the
PLAY*
button is
pressed.
Notes:
If still picture playback is continued for about five minutes,
the VCR will automatically change to stop mode in order to
prevent the tape from being damaged.
During special playback modes the picture may contain
some noise or vibration. But this is not a malfunction.
This convenient feature for finding the beginning of a specific
recording etc., is made possible by the
"Linear Time
Counter"
that indicates the tape run time in hours, minutes
and seconds.
Whenever
you
load
a cassette
tape, the counter will be
reset to "0:00:00".
The counter operates using control signals which are
recorded on the tape, hence if you play back a tape or
portion of tape which has nothing recorded on it, the counter
will not operate.
Notes:
When
rewinding further back from position "0:00:00", the
counter shows figures beginning with "-".
.
The tape stops at the memorized position even when using
fast forward when the counter reading begins with "-".
Press the RESET then the MEMORY button before
starting recording or playback. The zero point of the
counter is now memorized and the memory indicator
"~" will illuminate.
When the 44REW button is pressed at the end of
recording, or playback, the tape will be rewound
automatically to the memorized position and then stop.
10
Advertisement
Table of Contents
