Central Machinery 97869 Owner's Manual page 9

Hex Screw
(6)
Figure 1
b. Step 2) Attach the first Collector
Support (14) to the Base Plate (3).
Line up the Collector Support (14)
with holes on edge of the Base
Plate (3). Insert Hex Bolt (6) down
through Washer (4), Base Plate (3)
and secure in place with Nut (2).
(See Figure 1.)
Motor
(8)
Motor Base (5)
Figure 2
c. Step 3) Attach the second Collector
Support (14) through the inside
holes near where the Motor Base
(5) will be mounted. (See Figure 2.)
Insert Hex Bolt (6) down through
Washer (4) and Base Plate (3) and
secure in place with Nut (2). (See
Figure 2.)
Item 97869 For technical questions, please call 1-888-866-5797.
Collector
Support (14)
Base Plate
(3)
Collector
Support (14)
Hex Bolt (6)
Figure 3
d. Step 4) The Fan Housing (38) is
attached to the Motor (8) and Motor
Base (5) as a single unit. Secure
the Motor Base (5) to the Base Plate
(3) using six (6) Hex Bolts (6), six (6)
Washers (4) and six Nuts (2). (See
Figures 2 and 3.)
Hex Screws
(15)
with Washer
(16).
Secure with
Nuts (2)
Figure 4
e. Step 5) Set the Packing (29) on top
of the rectangular opening on the
Fan Housing (38) (see Step 4). Set
the Outlet (30) on top of the Fan
Housing (38) and Packing (29)-see
Figure 4. Slide Washer (16) onto
Hex Screws (15) and thread into the
six (6) holes in the lip of Outlet (30),
Fan Housing (38) and Packing (29).
Secure in place with Nuts (2). (See
Figure 4.)
Fan Housing (38)
Motor (8)
Hex Screw (6)
Motor Base (5)
Base Plate (3)
Hose (32)
Hose Clamp
(31)
Outlet (30)
Packing (29)
Fan Housing
(38)
Page 9