Central Machinery 98524 Set Up And Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Central Machinery Manuals
  4. Dust Collector
  5. CENTRAL MACHINERY 98524
  6. Set up and operating instructions manual
Central Machinery 98524 Set Up And Operating Instructions Manual

Central Machinery 98524 Set Up And Operating Instructions Manual

13” planer with dust collector
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
WITH DUST COLLECTOR
SET UP AND OPERATINg INSTRUCTIONS
Distributed exclusively by Harbor Freight Tools
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS mANUAL.
©
Copyright
2008 by Harbor Freight Tools
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
13" PLANER
3491 Mission Oaks Blvd., Camarillo, CA 93011
®
. All rights reserved. No portion of this manual or any artwork
98524
®
.

Advertisement

Table of Contents
loading

Related Manuals for Central Machinery CENTRAL MACHINERY 98524

Summary of Contents for Central Machinery CENTRAL MACHINERY 98524

  • Page 1 Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.

  • Page 2: Important Safety Information

    SAVE THIS mANUAL Keep this manual for the safety warn- ings and precautions, assembly, operat- ing, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number).
  • Page 3 Unmodified plugs and matching out- lets will reduce risk of electric shock. Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. Do not expose power tools to rain or wet conditions.

  • Page 4: Specific Safety Warnings

    Using personal safety devices reduce the risk for injury. Safety impact eye goggles and heavy work gloves are available from Harbor Freight Tools. Dust mask, non skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.
  • Page 5 These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. This product is not a toy. out of reach of children. People with pacemakers should consult their physician(s) before use.

  • Page 6: Grounded Tools: Tools With Three Prong Plugs

    gROUNDINg TO PREVENT ELECTRIC SHOCK AND DEATH FROm INCORRECT gROUNDINg WIRE CONNECTION: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug.

  • Page 7: Extension Cords

    Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-Prong Plug.) Extension Cords Grounded tools require a three wire extension cord. Double Insulated tools can use either a two or three wire extension cord.

  • Page 8: Specifications

    When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. INSTRUCTIONS FOR...

  • Page 9: Tool Set Up

    Mount the Elevating Handle (4) on top of the unit on the right or left side with Flat Washer (2) and Head Screw (1), as shown above. Place the Cap (9) on the other side. The Filter Bag (27.6) of the dust col- lection system has an open bottom.
  • Page 10 of the Lock Lever (49) down. See below. Handle of Lock Lever (49) The Handle (75) can be used to vary the depth or shallowness of cut be- yond the pre-set Thickness Knob. Handle On/off Lock (75) Switch Plug the Planer into a grounded, 120V electrical outlet.
  • Page 11 tripped, remove any materials from the Planer and push the Circuit Reset button. To prevent accidents, turn off the tool and disconnect its power supply after use. Clean, then store the tool in- doors out of children’s reach. SKU 98524 For technical questions, please call 1-800-444-3353.

  • Page 12: Maintenance And Servicing

    mAINTENANCE AND SERVICINg Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INjURY FROm ACCIDENTAL OPERATION: Turn the Power Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning...
  • Page 13 Use the included Hex Wrench to remove both Hex Bolts on the back of the blade case. Blade Cover Hex Bolts (19, 21) Remove the Blade Cover. Wearing work gloves, rotate the cut- ter head until the latch engages. Remove the six bolts (172) from the Cutter Head (168) and use the mag- nets to remove it.

  • Page 14: Troubleshooting

    Problem Possible Causes Tool will not start No power at outlet. Cord not connected. Gouging at ends of Dull Blades. board (snipe) Too little support of long boards. Uneven force on cutter head. Roller case not level with base. Lumber not butted properly. Grain is ragged Wood has a high moisture content.
  • Page 15 Problem Possible Causes Motor overheats Motor overloaded. Motor not cooling right. Circuit breaker or Motor overloaded. fuse keeps tripping Wrong circuit breaker or fuse. Dull blades. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. PLEASE READ THE FOLLOWINg CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLy DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLy.

  • Page 16: Parts List

    PARTS LIST Part Description Head Screw (20mm) Flat Washer (6mm) Elevating Handle Label Handle Cap Handle Bolt Handle Base Upper Cover Clevis Pin Bushing Roller Head Screw (16mm) Grip Screw (6mm) Air Guide Head Screw (10mm) Dust Guard Screw (5mm) Head Screw (10mm) Dust Chute Panel 1...
  • Page 17 PARTS LIST Part Description Screw Elevating Nut (R) Hex Screw (16mm) Hex Nut (8mm) Tap Screw (8mm) 2 Tooth Washer Cover Head Screw (10mm) Pointer Cover Head Screw (14mm) Spring Pointer Bushing Head Screw (8mm) Pointer Housing Roller Case 151.1 Motor 151.2 Gasket 151.3 Cap 151.4 Head Screw...

  • Page 18: Assembly Diagram

    ASSEmBLY DIAgRAm Diagram continued next page SKU 98524 For technical questions, please call 1-800-444-3353. Page 18...
  • Page 19 ASSEmBLY DIAgRAm, CONTINUED Base of Planer SKU 98524 For technical questions, please call 1-800-444-3353. Page 19...

  • Page 20: Limited 90-Day Warranty

    LImITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this prod- uct is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents