Central Machinery 97869 Owner's Manual page 10

Collector
(33)
Collector Support (14)
Hex Screws (6)
Figure 5
f. Step 6) Connect the Upper Bag
Support (13) to the Collector Support
(14) and Collector (33). Thread in
both Hex Screws (6) through the
Collector Support (14) and through
the Upper Bag Support (13) and into
the Collector (33). (See Figure 5.)
g. Step 7) Slide the Hose Clamp (31)
onto the Hose (32). Slide Hose
(32) with Hose Clamp (31) onto the
Outlet (30). Once the Hose (32) is in
place, tighten the screw on the Hose
Clamp (31) until the Hose (32) is
securely fastened to the Outlet (30).
(See Figure 4.)
h. Step 8) Slide the Hose Clamp (31)
onto the other end of the Hose (32).
Slide the top opening of the Hose
(32) over the duct in the Collector
(33). Tighten the screw on the Hose
Clamp (31) until the Hose (32) is
securely fastened.
i. Step 9) Place the Filter Bag (35)
on top of the Collector (33). Once
the Filter Bag is in place, adjust the
clamp so that the clip rests between
the teeth. Press the clamp down
Item 97869 For technical questions, please call 1-888-866-5797.
Upper Bag Support (13)
to lock in place. Extend the bag so
that the loop on the top hangs on the
Upper Bag Support (13).
j. Step 10) Place the Collection Bag
(36) on the bottom of the Collector
(33) and secure it with a clamp as in
step 9.
Figure 6
k. Step 11) Attach the Handle (37) to
the Collector (33) with Nut and Bolt
(39). (See Figure 6.)
Handle (37)
Nut and Bolt (39)
Page 10