Baxi Power HT 1.850 Installation, Operation And Maintenance Manual page 81

3.8 FAULT WARNINGS AND RESETTING THE BOILER
IT
If a fault occurs, a flashing warning code appears on the display.
AT
The fault warnings appear on the main display (figure 1 a) together with the
symbol (Figure 4).
To reset, press the reset button for at least two seconds.
GB
Figure 4
Fault warnings appear on the secondary display (figure 1 b) alternating with the time, both of them flashing
(figure 4.1). It is not possible to reset malfunction warnings which appear on the secondary display as the cause
of the alarm has first to be removed.
Figure 4.1
81
ISTRUCTIONS PERTAINING TO THE USER