Installation; Operation - Baumatic 34900409 Maintenance And User Manual

Scrapping old appliance
By ensuring that this product is properly disposed of, you will help prevent
potential negative consequences for the environment and human health,
which could otherwise arise due to inappropriate waste handling of this
product on reaching the end of its working life.
With proper disposal of the appliance, it is possible to recover valuable
raw materials!
This appliance is marked as conforming to the European Directive
2012/19/EU on Waste of Electrical and Electronic Equipment (WEEE).
The symbol on the product indicates that this appliance may not be
treated as normal household waste; it must, instead, be delivered over
to the nearest collection point for the recycling of electrical and electronic
equipment.
Disposal must be effectuated in accordance with the environmental
regulations in force for waste disposal.
For more detailed information about treatment, recovery and recycling of
this product, contact the competent public office (Department of Ecology
and Environment), your home household waste disposal service, or the
shop where you purchased the product.
Cut and dispose of the power cord with the plug.
Up until appropriate disposal, do not damage the tubing because they
contain the refrigerant gas.
For the disposal of packing materials, follow local regulations.
WEEE contains both polluting substances (which can cause negative
consequences for the environment) and basic components (which INSERT
can be re-used). It is important to have WEEE subjected to specific
treatments, in order to remove and dispose properly all pollutants,
and recover and recycle all materials.
Individuals can play an important role in ensuring that WEEE does
not become an environmental issue; it is essential to follow some
basic rules:
-WEEE should not be treated as household waste.
-WEEE should be handed over to the relevant collection points
managed by the municipality or by registered companies. In many
countries, for large WEEE, home collection could be present.
- when you buy a new appliance, the old one may be returned to the
retailer who has to collect it free of charge on a one-to-one basis, as
long as the equipment is of equivalent type and has the same
functions as the supplied equipment.
Conformity
This equipment, in the parts intended to come into contact with food
products, is in conformity with the requirements of EC Regulation
No. CE 1935/2004. Apparatus conforms with European Directive
2004/1 08/EC, 2006/95EC and successive amendments.

INSTALLATION

WARNINGS:
• Do not install the appliance in a damp or wet location as this could
compromise the insulation and result in leakage
Furthermore, on the exterior of the same, condensate could
accumulate
• Do not place the appliance in locations outside or near sources of
heat or exposed to direct sunlight.
The appliance operates properly within the range of environmental
temperatures indicated:
+10 +32'C for the climatic class SN
+16 +32'C for the climatic class N
+16 +38'C for the climatic class ST
+16 +43'C for the climatic class T
(See the nameplate of the product)
• Do not place containers with liquids on top of the appliance.
• Wait at least 3 hours after final placement before placing the appliance
in operation.
• If the appliance has been transported in a horizontal position, then this
time should be extended to at least 8 hours.
Electrical connection
After shipping, place the appliance vertically and wait at least 2 - 3 hours
before connecting it to the electrical system. Before inserting the plug into
the electrical socket, make sure that:
A
• The socket is earthed and in compliance with the law.
• The socket can withstand the maximum power load of the appliance, as
indicated on the nameplate of the refrigerator.
• The power supply voltage is within the amounts indicated on the
nameplate of the refrigerator.
• The cord must not be folded or compressed.
• The cord must be checked regularly and replaced solely by authorized
technicians.
• The manufacturer declines any liability whenever these safety measures
are not respected.
Electrical connection (for U.K. only)
Plug your appliance into the power socket.
If the plug we supply does not fit :
•
CUT IT OFF AND DESTROY IT!
You can't use it on other appliances, and the exposed wires could be
dangerous if anyone plugged it in.
•
Fit a suitable plug, as follows:
Connect to the terminal in the plug
Green and
yellow wire
Blue wire
Brown wire
WARNING!
THIS APPLIANCE MUST BE EARTHED.
Fuses and plugs
This appliance should be used only on a socket with a minimum rating
of 13 Amp.
Our ready-fitted plug is already equipped with a 13 amp fuse which is
BS 1362 ASTA approved.
Any replacement should be exactly the same.
If the fuse cover is lost, do not use the plug until it is replaced.
A correct replacement fuse cover (obtainable from your dealer or Electricity
board) must be the same colour as shown or named on the insert on the
base of the plug.
Appliance start-up
Remove all wrapping/packaging present inside the appliance and clean
with water and baking soda or neutral soap.
After the installation, wait 2 - 3 hours to allow time for the refrigerator/ freezer
to stabilize at normal working temperature, before placing fresh or frozen
foods inside.
If the power cord becomes disconnected, wait at least five minutes before
restarting the refrigerator/ freezer. At this point, the appliance is ready for
use.
Turning On/Off
• The thermostat unit for control of the appliance is located inside of the
refrigerator compartment (Fig.1).
Rotate the thermostat knob of the thermostat beyond the "0" position.
The light is on when the refrigerator door is open. Turning the knob to "0"
completely turns off the product.
EN 3
Marked with the letter E,
OR marked with the Earth
symbol,
OR coloured green,
OR coloured green and
yellow.
Marked N,
OR coloured black.
Marked L,
OR coloured red.

OPERATION

(no display)
2
1
Fig. 1