Display Setup - Kenwood DDX9705S Instructions Manual

NOTE
• For how to update the software, see the relevant
update procedure manual which comes with the
software.

Display Setup

1
Press the [MENU] button.
h Popup menu appears. h
2
Touch [SETUP].
h SETUP screen appears. h
3
Touch [Display].
h Display screen appears. h
4
Set each parameter as follows.
■ [Dimmer]
Select the dimmer mode.
[OFF]: Does not dim the display and buttons.
[ON]: Dims the display and buttons.
[SYNC ](Default): Turns the dimmer function
on or off when the vehicle light control
switch is turned on or off.
[OSD Clock]
■
Select if you want to display the clock while
watching DVD video, etc.
"ON" (Default)/ "OFF"
[Key Color]
■
You can set the button illumination color.
(P.75)
[Wallpaper Customize]
■
You can change the wallpaper image or
color. (P.76)
[Viewing Angle]
■
If it is hard to see the image on the screen
evenly, adjust the viewing angle. The smaller
the (negative) value, the more whitish the
image on the screen looks.
"0" (Default)/ "-1"/ "-2"/ "-3"
[Screen transition effect]
■
Select whether to use the screen transition
effect when the source control screen is
switched to the Home screen.
"ON" (Default)/ "OFF"
Ñ
Customizing the key color
You can set the button illumination color.
1
Touch [Key Color] on the Display screen.
2
Touch the desired color.
■
[User]
The color you have set in the process of
[Adjust] is registered.
■ [Scan]
You can set the key color to continuously
scan through the color spectrum.
[Car Color]
■
This can be selected when a compatible ADS
adapter is connected.
3
Touch [
].
To register an original color
You can register your original color.
1
Touch [User] on the Key Color screen.
2
Touch [Adjust].
3
Use [−] and [+] to adjust each color value.
4
Touch [
].
Setup
75
English