Viewing Video Images Card - Raymarine Marine RADAR Operating Manual

Monitoring data and engines
Viewing video images
Card 20
How do I monitor data?....
NAVIGATION WAYPOINT
How do I monitor the engine(s)?....
ENGINE & FUEL
ENGINE
How do I view video images?....
VIDEO 1
?
More information...
ROUTE
FUEL RESOURCES
VIDEO 2 VIDEO 3
See the appropriate chapter of the Reference Manual.
FISHING SAILING
The data application enables you to view numeric
data generated by the system or by instruments
available on NMEA 0183, SeaTalk, SeaTalk
hs
2000 and SeaTalk . This information is displayed in a
series of panels which contain data relating to a
particular function or activity. These can be reconfigured
to your needs.
Press the appropriate soft key to select the panel of your
choice.
ENGINE &
TWIN ENGINE
RESOURCES
The engine monitor application enables you to
view data from up to three compatible engines. The
information is displayed in a series of panels which
contain data relating to engine, fuel and fuel
resources. These can be reconfigured to your needs.
Press the appropriate soft key to select the panel of
your choice.
To view data from 3 engines, change the 'No. of
engine' setting in the Panel Setup Menu
VIDEO 4 PRESENTATION
The video application enables you to view images
from a satellite TV, video or DVD player or on-board
camera.
Press the appropriate soft key, to select the video input
of your choice or set CYCLE VIDEO to ON (via the
PRESENTATION key), to cycle through the video inputs.
Note: Video images can only be viewed on the display
to which the video source is connected. They cannot be
networked to other Displays.
2
, NMEA