Table of Contents
Advertisement
60
i. Rotate the CH knob to scroll through the selections.
ii. When the desired character appears, push in the CH knob to accept it.
iii. Continue this process until all characters have been selected.
You can also press the microphone UP/ DOWN keys to select each char-
acter and then press the microphone HI/LO key to accept.
5. Continue this process until all NAME characters are selected. Press and
hold the CH knob to accept the name and move on to the MMSI ID.
6. Use same procedure to enter the MMSI characters.
Note: The last selection in each field is a left arrow (<), which repre-
sents a BACKSPACE. Accepting the arrow returns the current char-
acter to its default value and moves you back to the previous position.
The next character to be filled in sequence is underlined (_).
Note: Pressing and holding CH indicates you have completed edit-
ing the current line and forwards you to the first position of the next
line. This eliminates the need to accept each character individually.
Ray54E VHF Radio
Hide quick links:
Advertisement
Table of Contents
