74
6.0nm
Csr Pos
N
WPT 0001
SAVE ROUTE
SAVE ROUTE
4. Continue entering new waypoints until your route is complete.
5. To save the route for later use (and rename it if desired):
Press SAVE ROUTE or ENTER. The Edit Route dialog box is displayed. Press
ENTER to accept the defaults. You can edit the route (see page 79).
or
—
To save and immediately follow the built route:
Press FOLLOW QUICK ROUTE. The route is saved under the name 'Quick
Route'. If a Quick Route already exists it is overwritten. The system then ini-
tiates a follow route.
Note: If you want to keep the Quick Route, you will need to rename it. See "Changing the
Name or Color of a Route" on page 85.
... using existing waypoints
You can use waypoints that already exist, to build a new route.
A
ROUTES
North-Up
50°45.914
W 001°31.743
WPT 0002
FOLLOW
FOLLOW
QUICK ROUTE
QUICK ROUTE
—
WPT 0003
PLACE
PLACE
WAYPOINT
WAYPOINT
WAYPOINT
WAYPOINT
NEW ROUTE
A65 GPS Chartplotter
(Relative Motion)
252°T
26.74nm
WPT 0004
UNDO
UNDO
USE WPT
USE WPT
LIST
LIST
USE THIS
WAYPOINT