Raymarine A65 Owner's Handbook Manual page 71

Chapter 4: Using the Chartplotter
1.0nm
Position N
Bearing from Origin to Destination:
dashed line marking original
course of GOTO (unchanged)
5. When you arrive at the target waypoint an alarm sounds and a warning mes-
sage is displayed. To de-activate this alarm, press any key.
6. To set the cross track error (XTE) to zero and move the origin to the actual ves-
sel position press RESTART XTE.The The BOD and BVD lines are now aligned.
7. To stop navigating to the waypoint, press STOP GOTO. The BOD and BVD lines
are removed.
Note: For more information on navigating with Waypoints, please refer Chapter 3: Work-
ing with Waypoints.
North-Up
25°18.160 W 080°19.397
STOP GOTO
STOP GOTO
Bearing from Vessel to Destination:
dashed (blue) line marking actual
current course of GOTO (updated)
Relative Motion
-.-°T
WPT 0005
RESTART
RESTART
TE
TE
Target Waypoint
71
0.0nm