Chapter 2: Maintenance And Fault Finding; Maintenance; Servicing And Safety; Instrument - Raymarine ST40 Owner's Handbook Manual

Bidata instrument
Hide thumbs Also See for ST40:
Table of Contents

Advertisement

Chapter 2: Maintenance and Fault Finding

Chapter 2: Maintenance and Fault Finding

2.1 Maintenance

Servicing and safety

Instrument

• Raymarine equipment should be serviced only by authorised
Raymarine service technicians. They will ensure that service
procedures and replacement parts used will not affect performance.
There are no user-serviceable parts in any Raymarine product.
• Some products generate high voltages, so never handle the cables/
connectors when power is being supplied to the equipment.
• When powered up, all electrical equipment produces
electromagnetic fields. These can cause adjacent pieces of electrical
equipment to interact with one another, with a consequent adverse
affect on operation. In order to minimise these effects and enable
you to get the best possible performance from your Raymarine
equipment, guidelines are given in the installation instructions, to
enable you to ensure minimum interaction between different items
of equipment, i.e. ensure optimum Electromagnetic Compatibility
(EMC).
• Always report any EMC-related problem to your nearest Raymarine
dealer. We will use any such information to improve our quality
standards.
• In some installations, it may not be possible to prevent the
equipment from being affected by external influences. In general
this will not damage the equipment but it can lead to spurious
resetting action, or momentarily may result in faulty operation.
• Always switch off the power to Raymarine equipment before
working on it.
When requesting service, please quote equipment Type, Model
Number, Serial Number and, if possible, Software Release Issue. The
Software Release Issue can be ascertained by means of the
Intermediate Calibration facility, see Chapter 4, Calibration.
Certain atmospheric conditions may cause a small amount of
condensation to form on the instrument window. This will not harm the
instrument and will clear after the instrument has been switched on for a
short period.
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents