Dealer Calibration - Raymarine ST40 Owner's Handbook Manual

32

4.4 Dealer calibration

Dealer calibration enables you to set:
• User calibration on/off.
• Boat show mode on/off.
Dealer calibration also gives access to the Factory defaults screen.
This enables you to reapply the factory settings if you want to reset the
instrument to a known operating condition.
Follow the procedure in the Dealer calibration flow diagram.
INTERMEDIATE CALIBRATION
During normal operation
hold down and
Software
version
ST40
Depth
status
ST40
Speed
status
ST40
To save your settings and return to normal operation from any screen,
hold down and for approximately 2 seconds
ST40 Bidata Instrument Owner's Handbook
for approximately 4 seconds
Note:
If there is no key activity when
the Software version screen
is displayed, calibration will
time out to normal operation
after 5 seconds,
BIDATA
CAL
BIDATA
CAL
BIDATA
D4745-2