Chapter 2: Maintenance and Fault Finding
Chapter 2: Maintenance and Fault Finding
2.1 Maintenance
Servicing and safety
• Raymarine equipment should be serviced only by authorised
• Some products generate high voltages, and so never handle the
• Always report any EMC related problem to your nearest
When requesting service, please quote equipment Type, Model
Number and, if possible, Software Release Issue. The Software
Release Issue can be ascertained by means of the Intermediate
Calibration facility, see Chapter 4, Calibration.
Instrument
Certain atmospheric conditions may cause condensation to form on
the inside of the instrument window. This will not harm the instrument
and can be cleared by increasing the illumination setting to Level 3.
Periodically clean your ST60 instrument with a soft damp cloth. Do
NOT use chemical and/or abrasive materials to clean the instrument.
Cabling
Examine all cables for chafing or other damage to the outer shield and,
where necessary, replace and re-secure.
Raymarine service engineers. There are no user-serviceable parts in
any Raymarine product.
cables/connectors when power is being applied to the equipment.
Raymarine dealer. We will use any such information to improve
our quality standards.
9