Connecting the Network Cables
18
Dual-Attachment Station (DAS)
Adjacent DAS
"
!
...
Figure 9.
Example of a DAS Configuration
To connect the FDDI interface as a DAS without a bypass switch, connect MIC
A of the FDDI Module to MIC B of the adjacent DAS on the ring, and connect
MIC B of the FDDI Module to MIC A of another (or the same) adjacent DAS
on the ring.)Single-Attachment Station (SAS)
Single-Attachment Station (SAS)
FDDI
Concentrator
(shown as a DAS
device)
FDDI
Figure 10.
Example of an SAS Configuration
To connect the FDDI Module as an SAS, connect either MIC A or MIC B to an
M port on the FDDI concentrator in the FDDI ring. For information on cables,
refer to "Cables and Connectors" on page 28.
Switch 2000 with
FDDI Module
!
"
E
E
Module
EA5 4
Adjacent DAS
"
!
Connect Either MIC A or MIC
B to any M Port on the
Concentrator)
EA5 3
...